Photo lithography Printmaking
This Guide to Printmaking was written by artist Rosie Roberts
‘Printmaking’ refers to a wide assortment of processes characterised by their equipment and methodical actions. The disciplines involved utilise a large variety of techniques in different ways to create original and editioned works. Scotland has a strong tradition of encouraging printmaking, giving home to print workshops in all its major cities.
Contemporary printmaking can be loosely divided into categories although there is much overlap between the individual disciplines and artistic or experimental endeavours into areas of printmaking usually reserved for the world of design.
Historically in1507, James IV of Scotland granted Walter Chepman, an Edinburgh merchant, and his business partner Andrew Myllar, a bookseller, the first royal license for printing in Scotland, from that point on printing presses – text-based or pictorial – became integral to Scotland’s creative community. With technological advances in the subject and artistic innovation printmaking is a key part of Scotland’s globally renowned art scene
Here we will look at printing methods as follows: Lithography, Intaglio, Screenprinting, Relief and Digital, with a final note about paper.
Lithography is based on the beautifully simple concept of oil rejecting water. Images are made on smooth limestone slabs or metal plates and are characteristically flat in drawn surface and finished image.
The process starts with grinding or polishing the printing surface to ensure an even tone throughout the print. Images are then created with fatty materials, oil/ wax/grease on the stone or plate. Following the drawing or image creation stage the whole surface is treated with a part acid part gum Arabic solution so that the negative space - where the fat does not protect the surface - becomes ‘etched’. The surface is then moistened so that the etched areas absorb water making them repellent to greasy lithographic ink, which, will in turn cling to the fatty drawing. The drawing is then transferred onto dry smooth paper that, unless it is offset, will produce a reverse image.
Photolithography is a popular method of combining traditional printmaking with contemporary technology, it is a process by which images are photographically transferred to a litho surface and then printed by hand. In this process colour separation experimentation can be used and it is a method respected by printmakers of reproducing photographic works.
Intaglio printing is the process of scratching into a prepared surface in order to sink ink into the scratches; intaglio printing has an inherent texture and physicality to it.
Intaglio printing was born of the ancient art of engraving; however artists could only exploit etching –the common name for the method - on a wider scale once the laborious practice of engraving by hand was developed into a chemical process.
This process starts by coating a sheet of metal with a waxy surface; following this an image is incised into the wax leaving metal lines exposed. The plate is then sunk in an acid bath wherein exposed areas are subjected to chemical corrosion. The plate is cleaned of wax and rubbed with ink, once the ink is buffed thoroughly into the plate excess ink is wiped away and the drawing is transferred to softened paper through pressing. In this way the image created is not only there in ink but also in a subtle embossment giving a luxurious quality to etched prints.
Prints can be coloured using a variety of inks and aquatints.
Artists have exploited this subtle physicality, by lengthening the time in the acid bath and using no ink a sculptural embossed ‘invisible’ image can be made. Such experiments to widen the limits in which printmakers work is an ode to the dedication of print based artists.
Made truly famous by Andy Warhol in the 1960s screenprinting is a stencil and screen based practice with a flat image result. It was originally developed in the Far East using a mesh of human hair!
In contemporary screenprinting images are made on a translucent surface with light blocking materials, a stretched screen that consists of a very fine mesh is then covered with a photosensitive solution. The opaque images are then placed on an exposure unit, which is a sort of giant light box. The screen placed on top of the images will be exposed to the light source and subsequently become a stencil of the image. The photosensitive solution becomes hard where the light has reached it and stays soft in the image areas. Once exposed, the screen is hosed with water to wash out the soft solution and the stencil is created. Images can also be transferred onto the screen using paper stencils or painting directly onto the screens surface with stop-out paint. Photos or digitally created works can also be transferred to the screen using a stencil printed onto acetate and then photo exposed on the screen
The stenciled screen is then mounted onto a screenprinting press, with ink at one end and paper below. By lowering the screen onto the bed of the press and drawing across the screen using a squeegee the image is created. The ink is pushed through the open areas of the mesh and onto the paper below.
For an image using multiple colours this process must be repeated for each separation which to ensure registration – the correct alignment of all the colours - requires difficult disciplined work and perseverance.
Screenprinting is the most widely used form of printmaking and it can be very adaptable to the needs of the artist, in the current show at Glasgow Print Studio Meaning Inc. as part of the GENERATION project Michael Fullerton exhibits large scale golden screenprints essentially flat but with an incandescent depth to them created by the method. On the other hand emerging artist Frances Lightbound literally bends the rules of the two dimensional technique by printing onto metal which she then sculpts into forms which reflect her architectural interests.
The versatility of screenprinting make it a very exciting medium.
Relief printing derives its name not from the finished article that is two dimensional, but from the sculpted equipment used during the printing process. Relief printing can be seen as the opposite of intaglio methods as the ink sits on top of the relief or object rather then within the gauged marks themselves.
Woodcut is the process by which a flat piece of wood is carved and gauged to create an image. It is then treated with ink generally using a roller to keep ink out of the gauged space, the block is then placed on a press with paper on top overlaid with packing sheets, the press is then either brought down or rolled across the block and the paper to created the print. Like in lithography and screenprinting woodcuts can be used to make colour separations.
Linocut become popular in the early twentieth century and follows exactly the same process as woodcut. Its popularity is due to its ease in carving and relative low cost. The technique is often used in introductions to basic printmaking.
Woodblock printing is often used to create free hand patterns, blocks of carved wood in varying shapes or forms are dipped in ink and then pressed onto paper to create the print. Woodblock is a popular method of making bespoke textiles. This process is used by textile artist Meg Held.
Photo: Meg Held
Digital Giclée, 2D Digital Printing
Deriving its name from the French verb ‘to spray’ Giclée is the name commonly used by artists, galleries and manufacturers to describe a high quality digital inkjet print.